Noyes, F. R. Noyes’ Knee Disorders: Surgery, Rehabilitation, Clinical Outcomes E-Book (Elsevier Health Sciences, 2016).
Kanwar, S. & Vijayavenkataraman, S. Bioprinting design of 3D printed scaffolds for bone tissue engineering: A review. Bioprinting 24, e00167 (2021).
Google Scholar
Krzysztof, P. & Pokrowiecki, R. Porous titanium implants: A review. Adv. Mater. Eng. 20, 1700648 (2018).
Google Scholar
Aro, H. T. & Aho, A. J. Clinical use bone allografts. Ann. Med. 25, 403–412 (1993).
Google Scholar
Iqbal, N. et al. Recent developments in biodegradable materials for tissue engineering paradigms. A critical review. Int. Mater. Rev. 64, 91–126 (2019).
Google Scholar
Bose, S., Roy, M. & Bandyopadhyay, A. Recent developments in bone tissue engineering and scaffolds. Trends in Biotechnol 30, 546–554 (2012).
Google Scholar
Porter, J. R., Ruckh, T. T. & Popat, K. C. Bone tissue engineering: A review in bone biomimetics and drug delivery strategies. Biotechnol. Prog. 25, 1539–1560 (2009).
Google Scholar
Obrien, F. J. Biomaterials & scaffolds for tissue engineering. Mater. Today 14, 88–95 (2011).
Google Scholar
Ma, P. X. Scaffolds to tissue fabrication Mater. Today 7, 30–40 (2004).
Google Scholar
Cheung, H.-Y., Lau, K.-T., Lu, T.-P. & Hui, D. A critical review on polymer-based bio-engineered materials for scaffold development. Compos. Part B Eng. 38, 291–300 (2007).
Google Scholar
Jonoobi, M., Harun, J., Mathew, A. P. & Oksman, K. Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion. Compos. Sci. Technol. 70, 1742–1747 (2010).
Google Scholar
Patel, D. K., Deb, S., Hexiu, J., Ganguly, K. & Lim, K. Bioactive electrospun nanocomposite scaffolds of poly(lactic acid)/ cellulose nanocrystals for bone tissue engineering. Int. J. Biol. Macromol. 162, 1429–1441 (2020).
Google Scholar
Elena, M. et al. Three-dimensional printed polycaprolactone-microcrystalline cellulose scaffolds. J. Biomed. Mater. Res. Part B 107B, 521–528 (2019).
Cakmak, A. M. et al. 3D printed polycaprolactone/gelatin/bacterial cellulose/hydroxyapatite composite scaffold for bone tissue engineering. Polymers (Basel). 12, 1962 (2020).
Google Scholar
Meftahi, A. et al. For skincare, cosmetics and healthcare, nanocelluloses can be used as biocompatible skin materials: Regulations and formulations. Carbohydr. Polym. 278, 118956 (2022).
Google Scholar
Bhattarai, N., Li, Z., Edmondson, D. & Zhang, M. Alginate-based nanofibrous scaffolds: Structural, mechanical, and biological properties. Adv. Mater. 18, 1463–1467 (2006).
Google Scholar
Feng, B., Tu, H., Yuan, H., Peng, H. & Zhang, Y. Acetic-acid-mediated miscibility toward electrospinning homogeneous composite nanofibers of GT/PCL. Biomacromol 13, 3917–3925 (2012).
Google Scholar
Bhattarai, N. et al. Nanofibers made from natural-synthetic, synthetic polyblends for biomedical purposes Adv. Mater. 21, 2792–2797 (2009).
Google Scholar
Pon-on, W., Suntornsaratoon, P. & Charoenphandhu, N. Synthesis and investigations of mineral ions-loaded apatite from fish scale and PLA/chitosan composite for bone scaffolds. Mater. Lett. 221, 143–146 (2018).
Google Scholar
Edwards, A., Jarvis, D., Hopkins, T., Pixley, S. & Bhattarai, N. Poly(ε-caprolactone)/keratin-based composite nanofibers for biomedical applications. J. Biomed. Mater. Res. Part B Appl. Biomater. 103, 21–30 (2015).
Google Scholar
Belaid, H. et al. Boron nitride based nanobiocomposites : design by 3D printing for bone tissue engineering. Acs Appl. Bio Mater. 3, 1865–1875 (2020).
Google Scholar
Soundarya, S. P., Menon, A. H., Chandran, S. V. & Selvamurugan, N. Bone tissue engineering: Scaffold preparation using chitosan and other biomaterials with different design and fabrication techniques. Int. J. Biol. Macromol. 119, 1228–1239 (2018).
Google Scholar
Guo, L. et al. The role of natural plasticmers in bone tissue engineering. J. Control. Release 338, 571–582 (2021).
Google Scholar
Martínez-moreno, D., Jim, G. & Marchal, J. A. A. Mater. Sci. Eng. Eng. 122, 111933 (2021).
Google Scholar
Bobbert, F. S. L. & Zadpoor, A. A. A. Mater. Chem. Chem. 5, 6157–6414 (2017).
Google Scholar
Mirkhalaf, M. et al. 3D-printed scaffolds: Redefining architectural effects through rational design to optimize bone tissue regeneration Appl. Mater. Today 25, 101168 (2021).
Google Scholar
Shirzad, M., Zolfagharian, A., Matbouei, A. & Bodaghi, M. Design, evaluation, and optimization of 3D printed truss scaffolds for bone tissue engineering. J. Mech. Behav. Biomed. Mater. 120, 104594 (2021).
Google Scholar
Radhakrishnan, S. et al. 3D printing antimicrobial polycaprolactone (antimicrobial) scaffolds for tissue engineering. Mater. Sci. Eng. Eng. 118, 111525 (2021).
Google Scholar
Belaid, H. et al. New biocompatible 3D printed graphene-oxalate scaffolds. Mater. Sci. Eng. Eng. 110, 110595 (2020).
Google Scholar
Wang, W. et al. 3D printing of PLA/nHA composite scaffolds with custom mechanical properties and biological functions to aid bone tissue engineering Compos. Part B 224, 109192 (2021).
Google Scholar
Mondal, S., Phuoc, T., Pham, V. H. & Hoang, G. Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application. Ceram. Int. 46, 3443–3455 (2020).
Google Scholar
Zhang, B. et al. 3D printed bone tissue regeneration PLA/HA scaffolds with extensive performance optimizations Mater. Des. 201, 109490 (2021).
Google Scholar
Du, J. et al. Comparative evaluation of chitosan and cellulose acetate as well as polyethersulfone microfiber scaffolds for neural differentiation Carbohydr. Polym. 99, 483–490 (2014).
Google Scholar
Shi, Q. et al. The osteogenesis caused by a bacterial cellulose scaffold containing bone morphogenetic Protein-2. Biomaterials 33, 6644–6649 (2012).
Google Scholar
Joseph, B., Sagarika, V. K., Sabu, C., Kalarikkal, N. & Thomas, S. Cellulose nanocomposites: Fabrication and biomedical applications. J. Bioresour. Bioprod. 5, 223–237 (2020).
Google Scholar
Lin, N. & Dufresne, A. Nanocellulose in biomedicine: Current status and future prospect. Eur. Polym. J. 59, 302–325 (2014).
Google Scholar
Murizan, N. I. S., Mustafa, N. S., Ngadiman, N. H. A., Mohd Yusof, N. & Idris, A. Review of nanocrystalline cellulose for bone tissue engineering applications. Polymers (Basel). 12, 2818 (2020).
Google Scholar
Shuai, C., Yuan, X., Yang, W., Peng, S. & Qian, G. Synthesis of a mace-like cellulose nanocrystal @ Ag nanosystem via in-situ growth for antibacterial activities of poly-L-lactide scaffold. Carbohydr. Polym. 262, 117937 (2021).
Google Scholar
He, Y., Li, H., Fei, X. & Peng, L. Carboxymethyl cellulose/cellulose nanocrystals immobilized silver nanoparticles as an effective coating to improve barrier and antibacterial properties of paper for food packaging applications. Carbohydr. Polym. 252, 117156 (2021).
Google Scholar
Kumar, A. et al. Crosslinking functionality and microstructure of cellulose nanocrystals reinforced by poly(vinyl alginate/sodium aginate hybrid scaffolds. Int. J. Biol. Macromol. 95, 962–973 (2017).
Google Scholar
Rashtchian, M., Hivechi, A., Bahrami, S. H., Milan, P. B. & Simorgh, S. Fabricating alginate/poly(caprolactone) nano fibers with enhanced bio-mechanical properties via cellulose nanocrystal incorporation. Carbohydr. Polym. 233, 115873 (2020).
Google Scholar
Kumar, A., Madhusudana, K. & Soo, S. Development of sodium alginate-xanthan gum based nanocomposite scaffolds reinforced with cellulose nanocrystals and halloysite nanotubes. Polym. Test. 63, 214–225 (2017).
Google Scholar
Kumar, A., Rao, K. M. & Han, S. S. Mechanically viscoelastic nanoreinforced hybrid hydrogels composed of polyacrylamide, sodium carboxymethylcellulose, graphene oxide, and cellulose nanocrystals. Carbohydr. Polym. 193, 228–238 (2018).
Google Scholar
Sucinda, E. F. et al. International journal for biological macromolecules development & characterisation packaging film from Napier, cellulose nanowhisker reinforced Polylactic acid (PLA), bionanocomposites Int. J. Biol. Macromol. 187, 43–53 (2021).
Google Scholar
Vorawongsagul, S., Pratumpong, P. & Pechyen, C. Preparation and foaming behavior of poly(lactic acid)/poly(butylene succinate)/cellulose fiber composite for hot cups packaging application. Food Packag. Shelf Life 27, 100608 (2021).
Google Scholar
Ghaffari-bohlouli, P., Jafari, H., Khatibi, A., Bakhtiari, M. & Tavana, B. Osteogenesis enhancement using poly (L-lactide-co-D, L-lactide)/poly(vinyl alcohol) nano fi brous scaffolds reinforced by phospho-calcified cellulose nanowhiskers. Int. J. Biol. Macromol. 182, 168–178 (2021).
Google Scholar
Cui, L. et al. Rheology of PLA/regenerated Cellulose nanocomposites: Network formation, modeling. Mater. Des. 206, 109774 (2021).
Google Scholar
Chen, J., Zhang, T., Hua, W., Li, P. & Wang, X. 3D Porous polylactic acid/regenerated cellulose composite scaffolds based electrospun microfibers for biomineralization Colloids Surf. A Physicochem. Eng. Asp. 585, 124048 (2019).
Google Scholar
Rajeshkumar, G. et al. Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites—A comprehensive review. J. Clean. Prod. 310, 127483 (2021).
Google Scholar
Mao, D., Li, Q., Bai, N., Dong, H. & Li, D. Porous stable poly(lactic acid)/ethyl cellulose/hydroxyapatite composite scaffolds prepared by a combined method for bone regeneration. Carbohydr. Polym. 180, 104–111 (2018).
Google Scholar
Yan, D. et al. Surface modified electrospun lactic acid (lactic acid) fibrous scaffold with cellulose nano fibrils, Ag nanoparticles, for ocular cell growth and antimicrobial applications. Mater. Sci. Eng. Eng. 111, 110767 (2020).
Google Scholar
Kumar, S. D., Venkadeshwaran, K. & Aravindan, M. K. Fused deposition modelling of PLA reinforced with cellulose nano-crystals. Mater. Today Proc. 33, 868–875 (2020).
Google Scholar
Wang, Z. et al. Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution. Ind. Crop. Prod. 109, 889–896 (2017).
Google Scholar
Wang, Q., Ji, C., Sun, L., Sun, J. & Liu, J. Cellulose nanofibrils filled poly(lactic acid) biocomposite filament for FDM 3D printing. Molecules 25, 2319 (2020).
Google Scholar
Hafizi, W., Ishak, W., Rosli, N. A. & Ahmad, I. Influence of amorphouscellulose on the mechanical, thermique, and hydrolytic degradation of poly(lactic Acid) biocomposites Sci. Rep. 10, 11342 (2020).
Google Scholar
Murphy, C. A. & Collins, M. N. Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing. Polym. Compos. 39, 1311–1320 (2018).
Google Scholar
Nagarajan, S. et al. Design of gelatin electrospun nanofibers from boron Nitride/gelatin for bone tissue engineering. ACS Appl. Mater. Interfaces 9, 33695–33706 (2017).
Google Scholar
Cataldi, A., Rigotti, D., Nguyen, V. D. H. & Pegoretti, A. Polyvinyl alcohol reinforced with crystalline nanocellulose for 3D printing application. Mater. Today Commun. 15, 236–244 (2018).
Google Scholar
Azarudeen, R. S. et al. 3D printable polycaprolactone-gelatin blends characterized for in vitro osteogenic potency Raja. React. Funct. Polym. 146, 104445 (2020).
Google Scholar
Alam, F., Shukla, V. R., Varadarajan, K. M. & Kumar, S. Microarchitected polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. J. Mech. Behav. Biomed. Mater. 103, 103576 (2020).
Google Scholar
Stoof, D. & Pickering, K. Fused deposition modelling of natural fibre/polylactic acid composites. J. Compos. Sci. 1, 8 (2017).
Google Scholar
Mazzanti, V., Malagutti, L. & Mollica, F. FDM 3D printing of polymers containing natural fillers: A review of their mechanical properties. Polymers (Basel). 11, 1094 (2019).
Google Scholar
Xu, L., Zhao, J., Qian, S., Zhu, X. & Takahashi, J. Green-plasticized poly(lactic acid)/nanofibrillated cellulose biocomposites with high strength, good toughness and excellent heat resistance. Compos. Sci. Technol. 203, 108613 (2021).
Google Scholar
Tarrahi, R. et al. A cellulose-based scaffold is developed for the sustained delivery of curcumin. Int. J. Biol. Macromol. 183, 132–144 (2021).
Google Scholar
Torgbo, S. & Sukyai, P. Fabrication of microporous bacterial cellulose embedded with magnetite and hydroxyapatite nanocomposite scaffold for bone tissue engineering. Mater. Chem. Phys. 237, 121868 (2019).
Google Scholar
Krieghoff, J. et al. An increase in the pore size for scaffolds can improve coating efficiency using sulfated hydrouronan. It also increases the mineralization potential of osteoblasts. Biomater. Res. 23, 23–26 (2019).
Google Scholar
Malliappan, S. P., Yetisgin, A. A., Sahin, S. B., Demir, E. & Cetinel, S. Bone tissue engineering: Anionic polysaccharides as promising scaffolds Ponnurengam. Carbohydr. Polym. 283, 119142 (2022).
Google Scholar
Gorgieva, S., Girandon, L. & Kokol, V. Mineralization potential of cellulose-nano fi brils reinforced gelatine scaffolds for promoted calcium deposition by mesenchymal stem cells. Mater. Sci. Eng. C 73, 478–489 (2017).
Google Scholar
K. Szustakiewicz Compos. Sci. Technol. 197, 108279 (2020).
Google Scholar
Dridi, A., Zlaoui, K. & Somrani, S. Mechanism of apatite formation on a poorly crystallized calcium phosphate in a simulated body fluid (SBF) at 37 °C. J. Phys. Chem. Solids 156, 110122 (2021).
Google Scholar
Zhang, Q. et al. Multifunctional nanodiamonds-PLLA composites are mechanically and biomineralized for bone tissue engineering. Biomaterials 33, 5067–5075 (2012).
Google Scholar
Zou, L., Zhang, Y., Liu, X., Chen, J. & Zhang, Q. Biomimetic mineralization on natural and synthetic polymers to prepare hybrid scaffolds for bone tissue engineering. Colloids Surf. B Biointerfaces 178, 222–229 (2019).
Google Scholar
Syahir, M. et al. Proceedings of entrapment collagen on a polylactic acid 3D scaffold as a possible artificial bone replacement Mater. Today Proc. 46, 1668–1673 (2021).
Google Scholar
Zhang, R. & Ma, P. X. Porous poly (L-lactic acid)/apatite composites created by biomimetic process. J. Biomed. Mater. Resour. 45, 285–293 (1999).
Google Scholar
Ngiam, M. et al. Fabrication and use of mineralized polymeric composites made from nanofibrous material for bone grafts. Tissue Eng. 15, 535–546 (2009).
Google Scholar
Fragal, E. H. et al. Biomimetic growth hydroxiapatite-cellulose nanowhiskers creates hybrid materials for bone tissue engineering. Carbohydr. Polym. 152, 734–746 (2016).
Google Scholar
Harris, S. A., Enger, R. J., Riggs, B. L. & Spelsberg, T. C. Development and characterization of a conditionally immortalized human fetal osteoblastic cell line. J. Bone Miner. Res. 10, 178–186 (1995).
Google Scholar
Zheng, D., Zhang, Y., Guo, Y. & Yue, J. The isolation and characterisation of nanocellulose with an unusual shape from walnut (Isolation and Characterization).Juglans Regia L.) shell agricultural refuse. Polymers (Basel). 11, 1130 (2019).
Google Scholar
Lee, S. H. & Song, W. S. Modification of polylactic acid fabric by two lipolytic enzyme hydrolysis. Text. Res. J. 83, 229–237 (2013).
Google Scholar
Lee, S. H., Kim, I. Y. & Song, W. S. Biodegradation of polylactic acid (PLA) fibers using different enzymes. Macromol. Res. 22, 657–663 (2014).
Google Scholar
Kokubo, T. & Takadama, H. How useful is SBF in predicting in vivo bone bioactivity ?. Biomaterials 27, 2907–2915 (2006).
Google Scholar